- Contact：kelvin Xiong
- Cel：0086-18657937325
- Tell：0086-0579-86613023
- Fax：0086-0579-86613023
- E-mail：Kelvin@alnonwoven.com
- Address：Dongkang Road , Liushi Street , Dongyang City, Zhejiang province
There are many types of styles available in the home improvement, but there will be many similar styles of decoration between relatives and friends. So some people are not satisfied with this and want to be unique. The best solution is to make wallpaper a highlight of your home.
Spunbonded nonwoven fabric is recognized as a green and environmentally friendly material. It can be fire retardant, has good water absorption and sound absorption, and can be applied to wallpaper. Spunbonded nonwoven wallpaper has good visual effect, good hand feeling and environmental protection. When attaching a spunbond nonwoven wallpaper, we need to pay attention to the following points:
1, spunbond nonwoven wallpaper cutting
According to the wallpaper's serial number, set the wallpaper, measure the height of the wall, and reserve 5 cm according to the height of the wall to cut the wallpaper. Remember to cut a roll of wallpaper at a time to prevent quality problems.
2, paste the surface treatment of spunbonded nonwoven fabric
The wall surface is required to be flat, clean and dry, and the color is uniform and uniform. There should be no gaps, uneven embossing defects, and the wall surface should be treated with a base film (or varnish) before construction.
3, brush spunbond nonwoven wallpaper glue
The spunbonded nonwoven wallpaper glue must be evenly brushed on the wall, the thickness can be 2mm, and the glue should not be directly brushed on the back of the nonwoven fabric, and it should not be soaked in water. Unlike other wallpapers, spunbonded nonwovens should be thicker and thicker than other wallpapers, reducing their fluidity.
4, paste spunbond nonwoven wallpaper
The spunbond nonwoven wallpaper was posted in a preferred order in advance.
5, spunbond nonwoven wallpaper cutting during construction
It is necessary to set up the edge to cut the construction. The specific method is to lap the edge during construction. The number of laps depends on the pattern, about 3 cm. The plain color nonwoven fabric is applied by the method of positive and negative stickers during construction. After ensuring the pattern alignment, use a ruler to press at the overlap to cut, try to avoid cutting at the corner, so as not to cause the wallpaper to be curled at the corner, ensure the cutting edge is sharp when cutting, no burrs At the same time, pay attention to the strength of the lower knife, to ensure that one cut, one cut, but not too much damage to the surface of the wall.
6, spunbond nonwoven wallpaper paste after cleaning
If there is dust on the surface after the construction, apply a short brush or tweezers, and do not wipe with a wet towel to cause pollution.
Dongyang Laichi Environmental Protection Technology Co., Ltd. is a well-received nonwoven fabric manufacturer, specializing in production and sales: nonwoven fabrics, elastic non-woven fabrics, spunbond nonwoven fabrics, medical non-woven fabrics. Laiwu spunbond nonwoven fabric is light, soft, breathable, non-toxic and environmentally friendly, ensuring product quality, and it is necessary to let customers buy the peace of mind and peace of mind.
For more product information, please contact: Mr. Zhu 13706796423 Website: http://www.jiankangwa.com/En_index.html